Skip to content
MANNOL Windshield Repair Kit MN9804

MANNOL Windshield Repair Kit MN9804

by MANNOL
€18.79 - €18.79
€18.79
€18.79 - €18.79
€18.79
SKU MN9804
  • Windshield Repair Kit a professional set for restoring windshields. Unlike other similar products, it does not require ultraviolet radiation.
  • The kit works by removing air from chips and cracks and filling them with a strong resin, making the treated area even stronger than before.
  • For the best results, repairs should be made as soon as possible after damage occurs, before the chipped or cracked area becomes contaminated.
Product properties:
  • Minimizes the risk of cracks forming after a pothole or chip on the windshield is repaired and helps prevent them from spreading further.
  • High-quality repair resin with extremely low viscosity reliably fills even the smallest cracks.
  • Allows for windshield restoration within 30-50 minutes.
Application:
  1. Clean the damaged windshield from dust and dirt using a cleaning cloth. For best results, degrease the glass surface around the chip using 9691 MANNOL Brake Cleaner.
  2. Remove glass fragments from the damaged area using the provided red button.
  3. Install the adhesive disc, ensuring the damaged area is positioned at its center.
  4. Place a black O-ring around the edges of the hole in the adhesive disc (black O-rings can be reused).
  5. Glue the red mushroom-shaped base on top of the adhesive disc and insert 2-6 drops of repair resin into the crack, depending on the severity of the damage.
  6. Install the syringe in the mushroom-shaped base with the plunger pressed all the way down. Pull the piston as far as possible to create a vacuum under the piston and wait 10 minutes. Remove the syringe, push the plunger back in, then pull it out again, waiting another 10 minutes.
  7. Remove the syringe, mushroom-shaped base, black ring, and adhesive disc. Clean any remaining adhesive from the glass using the scraper.
  8. Apply repair resin to any remaining damaged areas. Cover with a thermal plate and smooth it out to remove air bubbles.
  9. Wait 15 minutes, then remove the thermal plate or scrape it off using the scraper. Carefully remove dried repair resin from the glass.
Kit Includes:
  • Repair resin - 1 PC
  • Adhesive discs - 3 PCs
  • Red mushroom-shaped base - 1 PC
  • Thermoplastics - 5 PCs
  • Scraper with blade - 1 PC
  • Syringe with spring clip - 1 PC
  • Cleaning cloth - 1 PC
  • Red button - 1 PC
  • Black O-ring - 2 PCs

Welcome to Shopify Store

I act like: